Help: My device does not pass from Unlocked Bootloader screen.
Hi everyone!
I'm from Mexico and I have a Moto X 2014 (XT1097) before the brick had installed Android 5.1 Lollipop installed by the Retail Brazil RSD 5.1 and everything worked very well. Days previous to the softbrick, the battery was 100% after a few minutes completely discharged and load it again to turn it on. The day of SoftBrick I received a message "the app fb has stopped working" my phone became very slow and unresponsive, the message from the app did not disappear, so turn off the phone and turn it did not pass the screen Bootloader unlocked.
I tried to flash by RSD Lite software:
RET_MX 5.1
RET_BR 6.0
RET_LA 6.0
And the message that appears is:
Failed flashing process. 2/25 oem fb_mode_set -> Phone returned FAIL
In the lines of the device code reads:
cmd:getvar:max-sparse-size
cmd: oem fb_mode_set
failed to validate boot image
Boot up failed
It is noteworthy that can enter fastboot mode, I have the phone unlocked bootloader and load but does not turn off until the battery runs out.
And I tried to do Wipes data (Factory Reset) byfastboot and throw me a few lines of code and the screen, the result is off:
qe1/1
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_install
E:Can't open /cache/recovery/last_kmsg
I tried manually and flash each of the commands via ADB and me rejects all.
Pictures:
http://ift.tt/1Y8BRUA
http://ift.tt/1Tu1XTl
http://ift.tt/1Y8BOZa
Hi everyone!
I'm from Mexico and I have a Moto X 2014 (XT1097) before the brick had installed Android 5.1 Lollipop installed by the Retail Brazil RSD 5.1 and everything worked very well. Days previous to the softbrick, the battery was 100% after a few minutes completely discharged and load it again to turn it on. The day of SoftBrick I received a message "the app fb has stopped working" my phone became very slow and unresponsive, the message from the app did not disappear, so turn off the phone and turn it did not pass the screen Bootloader unlocked.
I tried to flash by RSD Lite software:
RET_MX 5.1
RET_BR 6.0
RET_LA 6.0
And the message that appears is:
Failed flashing process. 2/25 oem fb_mode_set -> Phone returned FAIL
In the lines of the device code reads:
cmd:getvar:max-sparse-size
cmd: oem fb_mode_set
failed to validate boot image
Boot up failed
It is noteworthy that can enter fastboot mode, I have the phone unlocked bootloader and load but does not turn off until the battery runs out.
And I tried to do Wipes data (Factory Reset) byfastboot and throw me a few lines of code and the screen, the result is off:
qe1/1
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_install
E:Can't open /cache/recovery/last_kmsg
I tried manually and flash each of the commands via ADB and me rejects all.
Pictures:
http://ift.tt/1Y8BRUA
http://ift.tt/1Tu1XTl
http://ift.tt/1Y8BOZa
Quote:
| ESPAÑOL: Ayuda: Mi dispositivo no pasa de la pantalla de Bootloader Desbloqueado. Soy de México y tengo un Moto X 2014 (XT1097) antes de brickearse tenía instalado Android 5.1 Lollipop instalado por RSD la Retail Brasil 5.1 y todo funcionaba muy bien. Días previos al softbrick tuve una falla, la batería estaba en un 100% después de unos minutos se descargó por completo y volví a cargarlo para poder encenderlo. El día del SoftBrick recibí un mensaje "la app de fb ha dejado de funcionar" mi teléfono se puso muy lento y no respondía, el mensaje de la app no desaparecía, así que apague el teléfono y al encenderlo no pasó de la pantalla de Bootloader Desbloqueado. Intenté flashear por RSD Lite el software: RET_MX 6.0 RET_BR 5.1 RET_LA 6.0 Y el mensaje que aparece es: Failed flashing process. 2/25 oem fb_mode_set -> Phone returned FAIL En las lineas de código del dispositivo se lee: cmd:getvar:max-sparse-size cmd: oem fb_mode_set failed to validate boot image Boot up failed Cabe mencionar que puedo entrar a modo fastboot, tengo el bootloader desbloqueado y el telefono carga pero no se apaga hasta que la batería se acaba. Ya intenté hacer Wipes data (Factory Reset) vía fastboot y me arrojan unas líneas de código y se apaga la pantalla, el resultado: qe1/1 E:Can't open /cache/recovery/log E:Can't open /cache/recovery/last_install E:Can't open /cache/recovery/last_kmsg Ya intenté flashear manualmente cada uno de los comandos via ADB y me rechaza todo |
from xda-developers http://ift.tt/1Tu1XTn
via IFTTT
No comments:
Post a Comment