TWRP for the HP Slate 21 Pro (ranger) Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* A lot.
*
TeamWin Recovery project (or TWRP for short) ported for the HP Slate 21 Pro (ranger).
Here are some images:Downloadhttp://ift.tt/1RbLZLuInstall/Flashing Instructions: 1. You will need the following things in order to install TWRP on the Slate 21 Pro: 1 USB male to USB male connector, a computer with ADB and fastboot installed, common sense.
2. Turn off device and boot into fastboot mode (Volume Down + Power)
2.5. If your device won't boot into fastboot using that key combo. Enable USB Debugging on your Slate and run the following command from your computer with the Slate connected and on:
Code:
adb reboot-bootloader
3. Connect your device to your computer by plugging one end of the USB cord into the lone USB port on the left-hand side of the device and the other end on any USB port on your computer.
4. Run the command "fastboot oem unlock" (no quotes)
5. Select yes on your Slate 21 Pro, after this step you will lose all your data. Vol Up to move Up, Vol Down to move Down, Brightness Up to select.
6. After fastboot has been unlocked, you'll need to flash TWRP to your recovery. Do do this run the following command:
Code:
fastboot flash recovery /path/to/downloaded/TWRP.img
Replace /path/to/downloaded/TWRP.img with where you downloaded TWRP provided by me (Quaesar). You can drag and drop the IMG into Terminal/CMD to do this easily.
7. Use the buttons on the side of the device to select "Recovery"
8. Profit! You now have the latest TWRP on your device!
Cyanogenmod 12.1: Currently under development, this section will be updated when a stable build is achieved.
Donations: You can donate to me for my hard work through PayPal. My donation email is
quaesarxda@gmail.com. Any and all donations are welcome regardless of amount. Thanks for supporting me!
Direct link:
http://ift.tt/1SRDtBlCredits Building this was a collaborative effort. The following developers/beta testers helped me provide you with this:
Quaesar (me): Main person, started project, etc etc.
UnjustifiedDev: Device tree cleaning
jackshiloh: Spending extensive time testing and logging for me
Ed: Testing
If you have any comments or questions, reply to this thread and I'll get to you whenever I can
PLEASE HIT THAT THANKS BUTTON!!! IT REALLY SHOWS YOU APPRECIATE MY WORK!!!!! Peace,
Quaesar
from xda-developers http://ift.tt/1OG9dTz
via
IFTTT