After lots of research, a few soft bricks, and a lot of frustration, I was finally able to get root, a deodexed and bloatware-free ROM, and Xposed onto my Galaxy Grand Prime from MetroPCS (model SM-G530T1). This method will likely work on most (if not all) other variants but I cannot confirm one way or another. The T-Mobile variant will almost certainly work because much of this is actually intended for that variant... but again, no guarantees. If you do, indeed, attempt this with a non-MetroPCS variant, please let me know your model number and if it works or not so i can add it to the compatibility/incompatibility list.
Known compatible variants:
SM-G530T1 - MetroPCS
Known incompatible variants:
N/A so far
This tutorial comes with no guarantees or warranties. I am not responsible if you brick your device or for any damage caused by following this tutorial. You can most likely recover any problems you find along the way by simply flashing back to Stock with Odin, but I can't guarantee that you will be able to. This is true of basically everything on XDA, so no surprises here.
I estimate the entire process taking less than a half hour, assuming that everything goes as expected, and that you don't need to flash back to stock first.
There is one caveat... the TrapKernel method fully roots the device, but it trips Knox. If you don't want to trip Knox, don't use this method. As an alternative, if all you want is some minor root functionality, KingRoot will give you SOME root functionality, but not enough to install Xposed, or to do many things that a true root gives you. KingRoot can be found here: SITE / DOWNLOAD
At any time, even if you brick your device, you can probably always flash back to Stock. Here is the Stock MetroPCS SM-G530TI 5.1.1 ROM: THREAD / DOWNLOAD
Alright... without further adieu, here are the files you will need:
Odin SITE / DOWNLOAD
ShinySide's TrapKernel for SM-G530T THREAD / DOWNLOAD
DUHAsianSKILLZ's deodexed and bloatware-free ROM for SM-G530T: THREAD / DOWNLOAD
Chainfire's FlashFire SITE / DOWNLOAD
Xposed Installer THREAD / DOWNLOAD
TWRP 2.8.7.0 (for lollipop) THREAD / DOWNLOAD
Custom Xposed Framework for Samsung Lollipop THREAD / DOWNLOAD
Got all the files you need? Here are the steps:
1. On your phone, boot to Download Mode by booting your device while holding down the Down Volume and Home Button, then hitting Volume Up. Connect it to your PC. If your PC doesn't recognize the phone, you need to install drivers. There are lots of threads out there with tutorials on how to do that. This tutorial assumes you already have the drivers.
2. On your PC, open Odin, Click the "AP" button, Select the file: TrapKernel_G530T_AOF8_Root.tar.md5. Flash it. Let the phone boot normally. If it doesn't load after a few minutes, pull the battery and reboot. If it continues to get stuck on boot, it probably failed. Flash back to Stock and try again.
3. On your phone, once it fully boots up, download Chainfire's SuperSU from the Play Store. You'll need it in order to authorize the root app in the next step.
4. On your phone, download FlashFire from the Play Store at the link above, or if you have the APK, install it. Open FlashFire and authorize SU permissions. Hit the + button, then Wipe. Check System data, 3rd party apps, Dalvik cache, Cache partition, and Cache partition format, then click the Checkmark on the top-right to confirm. Now hit the + button again, then Flash Zip or OTA. Select GwizRomSMG530T-V1.1.zip, then click the Checkmark on the top-right. Now click Flash. The screen will go off during this step... DON'T WORRY. It will take about 10 minutes total to boot for the 'first time'. This ROM basically removes Knox, retains root, and frees up a lot of resources that Samsung was using for useless bloatware. Even if you stopped at this step, your phone will be MUCH better off than with a purely Stock ROM on it. I noticed a HUGE performance improvement after installing this ROM.
5. On your phone, install XposedInstaller_3.0_alpha4.apk.
6. On your phone, open FlashFire. Tap the + button, then Flash Zip or OTA. Find TWRP_2870_Samsung_SM_G530H.zip and flash it. This one takes a little while to load, so be patient. I would say, if you're at the 10 minute mark after tapping Flash, it probably failed so pull the battery and reboot. If it continues to happen, you'll likely need to flash Stock and start over completely.
7. The phone will boot back to your home screen. Once it does, restart it and go into Recovery Mode by booting the phone while holding the Volume Up and Home buttons.
8. Once in Recovery, tap Install. Find and choose the file xposed-v86.0-sdk22-arm-custom-build-by-wanam.zip and swipe the slider at the bottom to Install Xposed.
9. Once it finishes flashing and boots back up, you're good to go. Full Root. Bloatware-Free. Really fast. With Xposed.
Known compatible variants:
SM-G530T1 - MetroPCS
Known incompatible variants:
N/A so far
This tutorial comes with no guarantees or warranties. I am not responsible if you brick your device or for any damage caused by following this tutorial. You can most likely recover any problems you find along the way by simply flashing back to Stock with Odin, but I can't guarantee that you will be able to. This is true of basically everything on XDA, so no surprises here.
I estimate the entire process taking less than a half hour, assuming that everything goes as expected, and that you don't need to flash back to stock first.
There is one caveat... the TrapKernel method fully roots the device, but it trips Knox. If you don't want to trip Knox, don't use this method. As an alternative, if all you want is some minor root functionality, KingRoot will give you SOME root functionality, but not enough to install Xposed, or to do many things that a true root gives you. KingRoot can be found here: SITE / DOWNLOAD
At any time, even if you brick your device, you can probably always flash back to Stock. Here is the Stock MetroPCS SM-G530TI 5.1.1 ROM: THREAD / DOWNLOAD
Alright... without further adieu, here are the files you will need:
Odin SITE / DOWNLOAD
ShinySide's TrapKernel for SM-G530T THREAD / DOWNLOAD
DUHAsianSKILLZ's deodexed and bloatware-free ROM for SM-G530T: THREAD / DOWNLOAD
Chainfire's FlashFire SITE / DOWNLOAD
Xposed Installer THREAD / DOWNLOAD
TWRP 2.8.7.0 (for lollipop) THREAD / DOWNLOAD
Custom Xposed Framework for Samsung Lollipop THREAD / DOWNLOAD
Got all the files you need? Here are the steps:
1. On your phone, boot to Download Mode by booting your device while holding down the Down Volume and Home Button, then hitting Volume Up. Connect it to your PC. If your PC doesn't recognize the phone, you need to install drivers. There are lots of threads out there with tutorials on how to do that. This tutorial assumes you already have the drivers.
2. On your PC, open Odin, Click the "AP" button, Select the file: TrapKernel_G530T_AOF8_Root.tar.md5. Flash it. Let the phone boot normally. If it doesn't load after a few minutes, pull the battery and reboot. If it continues to get stuck on boot, it probably failed. Flash back to Stock and try again.
3. On your phone, once it fully boots up, download Chainfire's SuperSU from the Play Store. You'll need it in order to authorize the root app in the next step.
4. On your phone, download FlashFire from the Play Store at the link above, or if you have the APK, install it. Open FlashFire and authorize SU permissions. Hit the + button, then Wipe. Check System data, 3rd party apps, Dalvik cache, Cache partition, and Cache partition format, then click the Checkmark on the top-right to confirm. Now hit the + button again, then Flash Zip or OTA. Select GwizRomSMG530T-V1.1.zip, then click the Checkmark on the top-right. Now click Flash. The screen will go off during this step... DON'T WORRY. It will take about 10 minutes total to boot for the 'first time'. This ROM basically removes Knox, retains root, and frees up a lot of resources that Samsung was using for useless bloatware. Even if you stopped at this step, your phone will be MUCH better off than with a purely Stock ROM on it. I noticed a HUGE performance improvement after installing this ROM.
5. On your phone, install XposedInstaller_3.0_alpha4.apk.
6. On your phone, open FlashFire. Tap the + button, then Flash Zip or OTA. Find TWRP_2870_Samsung_SM_G530H.zip and flash it. This one takes a little while to load, so be patient. I would say, if you're at the 10 minute mark after tapping Flash, it probably failed so pull the battery and reboot. If it continues to happen, you'll likely need to flash Stock and start over completely.
7. The phone will boot back to your home screen. Once it does, restart it and go into Recovery Mode by booting the phone while holding the Volume Up and Home buttons.
8. Once in Recovery, tap Install. Find and choose the file xposed-v86.0-sdk22-arm-custom-build-by-wanam.zip and swipe the slider at the bottom to Install Xposed.
9. Once it finishes flashing and boots back up, you're good to go. Full Root. Bloatware-Free. Really fast. With Xposed.
BTC Donations? :)
1GDHxwpQzTz9QaAobLsmGMp2Pu51V1qJcc
1GDHxwpQzTz9QaAobLsmGMp2Pu51V1qJcc
from xda-developers http://ift.tt/2aj5MLn
via IFTTT
No comments:
Post a Comment